Description
Overview of the Simple Energy Meter
The Simple Energy Meter (SEM) reacts to EMF, ionization and static charges as a combined energy field. Adjustable sensitivity levels enable the device to function in difficult environments. The SEM provides 4 operating modes to monitor the surrounding energy fields displaying levels on the 5 light display. Two of the energy monitoring modes provide audio tone feedback.
Modes Available on the Simple Energy Meter
Mode 1 – Energy Level Mode
- Mode 1 will show you the energy around the meter and display it on a 5 LED display.
- The sensitivity can be changed using the up / down buttons to filter background energy.
- Instead of “averaging,” energy is sampled rapidly, allowing the display to show different energy levels.
- Pressing the left button increases the sensitivity; pressing the right button decreases the sensitivity.
Mode 2 – Energy Level Mode with Audio Tones
- Mode 2 will show you the energy around the meter and display it on a 5 LED display.
- Includes Audio Tones which will alert you to these changes.
- The sensitivity can be changed using the up / down buttons to filter background energy.
- Instead of “averaging,” energy is sampled rapidly, allowing the display to show different energy levels.
- Pressing the left button increases the sensitivity; pressing the right button decreases the sensitivity.
Mode 3 – Averaged Energy Level Mode
- Mode 3 will show you the energy around the meter and display it on a 5 LED display, using the center LED to act as the average.
- By doing this, you can now see changes of both increases and decreases of energy.
Mode 4 – Averaged Energy Level Mode with Audio Tones
- Mode 4 will show you the energy around the meter and display it on a 5 LED display, using the center LED to act as the average.
- Includes Audio Tones which will alert you to these changes.
- By doing this, you can now see changes of both increases and decreases of energy.
Charging your Simple Energy Meter (SEM)
Charge the Simple Energy Meter with the provided USB to USB Mini cable. The USB Mini side of the cable will plug into the bottom of the unit. Plug the standard sized end of the USB cable into any USB port on a computer or spare cell phone charger. Charging may vary from 30 minutes to 2.5 hours. Run time on a fully charged unit ranges from 12-24 hours. For best results we recommend charging prior to each investigation. Please note that the cable provided with the unit is a USB to USB Mini and many cell phone charging cables will not work as most phones come with a USB Micro. Depicted is a the slightly larger USB Mini end on the left versus the smaller USB Micro on the right.
