Digital Dowsing devices like the Ovilus, Paranormal Puck, the PX, and EM Vortex have become part of the modern-day paranormal investigator lexicon. You have seen this equipment used on Ghost Adventures on the Travel Channel, Syfy, Paranormal State on A&E, and countless other programs and documentaries.
The Paranormal Puck
Status: (No Longer in production)
Intent: Designed to experiment with ITC phenomena.
- Captures and data logs changes in the environment
- Capture images and audio via the host PC.
- Includes alarm functions for unattended data capture.
Below is a shadow image captured in real time from Puck:
Displays EMF as video data, here are some examples:
UPDATE! 12/19/2015
The ECM Puck
Status: (No Longer in Production)
Background: This device was based on the original Puck except with smaller set of sensors and no audio/video functions.
The Ovilus I
Status: No Longer in Production
Intent: A hand held device that takes energy readings and creates speech
Details: Device has seven modes of operation. Features a built in 512 word list and a full phonetic generator for ITC experimentation.
The Ovilus FX
Status: No Longer in Production
Description: The successor to the Ovilus, the FX has a built in 1024 word dictionary. It features the ability to replay the last 1000 words said. Provides a pc interface( rs-232) to allow the real time capture of data and words spoken. The FX has 9 modes of operation including a built in speaker.
The PX
Status: No longer in Production
Description: Based on the Original Puck and the Ovilus, the PX is an ultra small low power ITC device that can run standalone or attached to a computer.
Production Notes: The PX was replaced by the PX 1.2
The PX Version 1.2
Status: No longer in Production
Production Notes: The PX was replaced by the Ovilus X
Description: Based on the Original Puck and the Ovilus, the PX is an ultra small low power ITC device that can run standalone or attached to a computer.
Operation Notes: ** Remember Hold Both Power and Mode down to turn off this version.
The Ovilus X
Status (No longer in Production)
The Ovilus X was replaced by the Ovilus X, Rev A
Based on the Original Puck and Ovilus and the PX. The Ovilus X
is ultra small low power ITC device That can run standalone or attached to a computer via its USB port.
The Ovilus X Rev A
Status (No longer in Production)
The Ovilus X rev A was replaced by the Ovilus X, Rev B
Based on the Original Puck and Ovilus and the PX. The Ovilus X
is ultra small low power ITC device That can run standalone or
attached to a computer via its USB port.
The Ovilus X Rev B:
Status (in Production)
Based on the Original Puck and Ovilus and the PX. The Ovilus X
is ultra small low power ITC device That can run standalone or
attached to a computer via its USB port.
DTD (Digital Text Display)
Status (no longer in production)
Companion Display to See the Spoken words from the Ovilus X series of devices.
OSD
Status (in Production)
Companion to the Ovilus X , the OSD allows the word Output from the Ovilus X to be superimposed on Video.
Ovilus II
Status ( Limited Release ) Replace by the Ovilus II Rev A
This version of the Ovilus feature LCD Display
Advanced Speech Generation and Audio capabilities
User Programmable word list and a flash memory
Ovilus II Rev A
Status ( no longer in production)
Ovilus II , feature near human speech with 11 different voices and a Built in LCD display, USB interface
Video Ovilus II
Video Ovilus II
Status ( in Production)
A full featured Ovilus X with a built in video camera and sonic range finder. Out puts to plug in Video Goggles with built in IR illuminator and USB interface.
Xcam
Xcam
Status ( in Production)
Built for paranormal investigation from the ground up. Features a IR/UV sensitive video camera sonic distance sensor and Thermal temperature sensor with values Overlaid in the video Output. Feature built in Ir illuminator with Strobe function and USB port
Talker Kit
Talker Kit:
Status (No Longer in Production)
A low cost kit utilizing phonetic speech to attempt ITC communications
Talking Sonic Reader
Status (No Longer in Production)
This unit tells the user how far way an object is by using ultrasonic sound it will also data log to a host PC as well.
R.E.V.P (Reverse EVP)
Status (No Longer in Production)
This device was built to understand 1 potential method of how EVP is created. Also another attempt at ITC communication . Based on simple em modulation the REVP sends audio out in the form of an electromagnetic field . Why, I believe its the same type of process some types of EVP is being captured. It also allows a way to create repeat events for new Equipment development.
ThermaSound
ThermaSound
Status (No Longer in Production)
Like Many investigators thermal imaging is not an economical answer.
The ThermaSound employs both thermal imaging and Ultra sonic s in the same unit.
By sweeping back and forth a thermal image is obtained at the same time ultra sonic
Measurements are taken of the same area. The result is a thermal image that also contains
Distance information. The software can tell the user where an item is in relation to the
ThermaSound in real time. Seen on the Ghost Adventures Stanley Hotel Episode
God Helmet
God Helmet: Status (Status (No Longer in Production)
This device creates a strong magnetic field, worn on the temple it creates a sense of
Being watched or a religious experience. However this controller can operate independent from its programming using the same input sensor system as the Ovilus allowing the helmet to be driven
By the environment.
IRUV Strobe
IRUV Strobe:
Status ( field tested)
Create strobe effects in 4 different wave lengths of light all computer controlled
Photon Drone
Photon drone
Status ( Patent and right Sold)
EM Pump
EM Pump:
Status (No Longer in Production)
Seen on Ghost Adventures
This device has a very simple premise, it creates a EM field in the ELF VLF frequency Range sweeping from elf to Vlf . The Idea is a possible beacon or attraction for phenomena. And a source of energy
EM Pump II
EM Pump II
Designed to be lighter smaller with a greater battery life than the original EM Pump. Built in Micro Processor and custom wound coil supply a beacon like effect in EMF creating a pulse train only 18ms long. With durations sweeping from .2 to 240 Hz
EM Vortex
EM Vortex: Status Limited release
Creates a Variable speed EM Vortex using multiple
Coils and microprocessor control.
**Seen on Ghost Adventures
Biometric Reader
Biometric reader:
Status (Proto)
This device is a hybrid between EKG and a lie detector the premise is to measure human response
To the environment , question or sensation.
**Featured in the film The Possessed
Video OSD Ovilus
Status (Proto field testing) ** Seen on the Ghost Adventures
This is an Ovilus couple with an IR camera and a Video Goggle unit. The user can operate
In complete darkness will getting data in a Heads Up display fashion via the goggles.
Allows the ability to be hands free of other equipment in the dark while monitoring in real time.
The Gravity well
Status ( Proto)
Designed to produce extremely high EM fields , this device is an attempt to create a magnetic vortex.
Computer controlled Sweep Radio BOX
Status ( devices are in field testing )
After doing the first RS hack box I started building a computer controlled version capable of
Multiple modes of operation linear sweep , random sweep and wave tuning. My original intension was to add these functions to the Puck.
ASA (Atmospheric sampling array)
ASA (Atmospheric sampling array)
Status ( field tested)
**Seen on Ghost adventures Cripple Creek episode
This unit samples the air for particulate count, calculates humidly and dew point as well returns temperature a barometric pressure.
Dual Head Laser
Close Up Field Image
Image projected on a flat surface
Status (Proto) ** As seen in the Booth Brother film The Possessed
Designed to utilize two spectrums of light (520 nm) and (820 nm)IR these laser beam split and create a rotating 3D cube effect. Based on a theory from Keith Age. The laser light creates a visible grid to try and detect the presence of Shadow People
Digital Dowsing Rods
Digital Dowsing rods
Status(Field Tested)
One of my first emf based devices used to create a dosing rod type of experience
Using an electronic display
3D EM reader
3D EM reader: Status (Proto)Based on the puck these device talk to each other and triangulate energy fields in the environment The Data is feed to a PC where in can be over laid on live video to produce a picture of the energy fields.
Micro EMF Detector
Micro EMF Detector: Status (Complete)
This Device is 100% digital single switch on off with four led display of EMF strength
Capacitive Field Reader
Capacitive field reader
Status ( Proto )
Device reads capacitive changes in open air, ultra sensitive to field changes
Talker Plus
Status( Prototype )
Talker is a EMF/ Inductive device that has an interface for 0-5 volt sensors such as light and
geomagnetic devices. It converts signals to Phonetic speech or signals to tones.
Ghost Lab
Status ( Complete )
Ghost creates a data streams from EMF, Light, Temperature and motion.
The Data is used to trigger event logging cameras and other devices.
Mini Board
Mini Board
Status (Complete )
The Mini Board is a broad use micro controller thats just a little larger than a quarter. It can be programmed to run Radios in Linear sweep and RVG type modes as well as trigger . Strobe lights or modulate lasers for intensity control.
High Current Controller
High Current Controller,
Status ( Complete )
Designed to pulse high current magnetic coils 200+ volts dc at 60 amps used for high intensity magnetic experiments
Five Channel USB Strobe controller
Five Channel USB Strobe controller: (No Photo ) Status (Complete)
Each channel can control up to 30 amps at 12 volts DC. Designed for large are high intensity displays
Inductive Transceiver (Crossover Talk)
Inductive Transceiver Status (Active on Skype since 2009)
This ITC device has no radio no voice chip just an Inductive feedback circuit. And tone generation . The feedback circuit will cancel out the tones leaving just a hissing Sound. When the device is entreated with the tones become present again in the form of an Audio signal. Use this device by calling Crossovertalk on Skype
The FM Ghost Box
The FM Ghost Box:
Status (On the Bench series Project 2010 )
Small battery operated palm sized programmable FM Ghost Box
Image PX
Status (Available for Download)
A free Software application designed to enhance and clarify images formatted
For net books.
iOvilus
iOvilus Status ( Complete)
Creating an ITC type device on a Cell Phone. The iOvilus has an enhanced dictionary mode featuring a 1000 word vocabulary for the iPhone and iPod Touch
Gaia Speaks
This Iphone app uses an array of paranormal pucks tied to a special Sensor array to allow for global consciousness experiments via the iPhone and iPod
iCrystal
Status (Complete)
This Iphone app uses the LCD to attempt charging and changing Crystals stored energy patterns
iPhone or iPod
emFX
status (Complete)
3 Axis EMF meter for the iPhone iPod and iPad
Designed for use in low light has two level ranges
Displays all axis plus min max and average as well as current
Emf levels. Also has a talking yes/no function for ITC work
MagCam
Status(complete)
3 axis EMF controlled camera
Select the emf level to capture images at Magcam
Captures the images and records time date and emf levels
Right on the image.
** As seen on Ghost Adventure Stanley Hotel Episode
ITC
Status (Complete)
ITC combines several popular ITC feature
In one research tool. Used to create Evp
From the sweep of vocal tracks
iGeo Phone
status ( Complete)
This app uses the 3 axis accelerometer to
Give a visual display of movement . Adjust able
Display range allows the user to set the sensitivity
MagCam Pro
Status(beta Testing)
Using a PC and multiple iphone or ipods as sensors to monitor
EMF Sound and Vibration remotely, also controls remote wifi cameras and sound recorders all from a central PC.
Field Research
Chronicling the past 3 years of experiments with Mediums and Investigators.
Kinect Experiments
Experiments with Kinect by Microsoft 3D camera with custom written interface software
Second image mapped in after an hour of filming at the Saint James Hotel
Also seen on Ghost Adventures Cripple Creek Episode
SEM Meter
Prototype SEM meter
(The Future of Paranormal Research)
Targeted Laser System for EVP
Targeted laser system for EVP
The Laser EVO system represents a complete shift in
The thought process of how EVP is captured and the
Mechanics behind what an EVP really is.
Project is currently in R&D as of 1 / 2014
Xcam K
Xcam K uses the process of Structured light
To see things we cannot perceive and give them
Form using computer software.
Project is currently in R&D as of 1 / 2012
GhostBoxHacks.com
www.Ghostboxhacks.com
Bills open source project site.
In Closing
We continue to build new devices for the paranormal field all the time, it is our passion.